- 17 Dec, 2024
- 1 Comment
- 3 Mins Read
EWP’s which Training do i need?
First of all, lets look at the definition of what a Elevated Work Platform (EWP) is,
EWP Definition: An Elevated Work Platform (EWP) is a type of lifting device designed to elevate a platform where workers, equipment, and materials can be raised to perform tasks. These platforms may be telescoping, hinged, articulated, or combinations of these mechanisms.
Classification by Height:
- Below 11 metres: These are EWPs with a boom length (height) under 11 metres.
- Above 11 metres: These are EWPs with a boom length exceeding 11 metres.
Measuring the 11-Metre Boom Length: The 11-metre threshold is defined by the greater of two measurements:
- a) Vertical Distance: This is the height from the floor of the platform to the surface supporting the EWP when the platform is at its maximum elevated position.
- b) Nominal Reach: This is the horizontal distance measured from the center point of rotation to the outer edge of the platform when it is fully extended
Essentially, when classifying the EWP, the 11-metre measurement should be taken as the larger of these two measurements, ensuring that the classification accurately reflects the platform’s potential reach or height.
Under 11 metres
CPCCCM3001 – Operate Elevated Work Platforms up to 11 Metres is a unit of competency from the Construction, Plumbing, and Services Training Package (CPCC) in Australia. It is specifically designed for individuals who operate Elevated Work Platforms (EWPs) in construction and other industries. This unit focuses on the safe operation of EWPs that are up to 11 meters in height, which includes the use of both scissor lifts and boom lifts
RIIHAN301E – unit of competency is part of the Resources and Infrastructure Industry Training Package (RII) in Australia. The unit is titled “Operate Elevating Work Platforms” and is focused on training individuals to safely and competently operate Elevated Work Platforms (EWPs) within the resources, construction, and infrastructure sectors.
a High Risk Work Licence (HRWL) is required for operating an Elevated Work Platform (EWP) over 11 metres in height. This licence is issued by WorkSafe or Safe Work Australia-approved bodies, depending on the state or territory.
Key Information about the EWP License for Platforms Over 11 Metres
High Risk Work Licence (HRWL) for EWP
- To operate an EWP with a boom length over 11 meters, workers need to obtain a High Risk Work Licence (HRWL) specific to EWP operation.
- The HRWL for EWPs is categorized under “WP” (Work Platform) and is required when using platforms that are designed to elevate workers to heights, such as:
- Boom lifts (e.g., articulated and telescopic)
- Vehicle-mounted lifts
Requirements for the High Risk Work Licence (WP)
To obtain the HRWL WP, the following steps are generally required:
Completion of Accredited Training:
- You must complete an accredited training course for operating EWPs over 11 meters. This includes practical and theoretical assessments.
- The unit typically associated with this training is TLILIC0005 Licence to operate a boom-type elevating work platform (boom length 11 metres or more)
Age Requirement:
- You must be at least 18 years old to apply for the High Risk Work Licence.
Competency Demonstration:
- After completing the necessary training, you must demonstrate competence through both theoretical exams and practical assessments.
- You will need to show that you can perform pre-operational checks, safely operate the EWP, use safety measures (e.g., fall protection), and respond to emergencies.
Medical and Fitness Checks (if applicable):
- Some states may require proof of medical fitness to operate high-risk equipment, particularly for workers in physically demanding roles.
Licensing Process
- Training and Assessment: Attend a registered training organization (RTO) that offers the relevant course for the EWP license. These organizations will provide training on both theoretical knowledge (safety, operational procedures, and regulations) and practical skills (operation of the platform, emergency response, etc.).
- Apply for the HRWL: Once you’ve completed the training and passed the assessments, you can apply for the HRWL (WP) through your state or territory’s regulatory body (e.g., WorkSafe, SafeWork). you have 60 days to apply for your licence
- Issuance of the Licence: Upon approval, you will receive the HRWL for operating EWPs over 11 meters.
Duration and Renewal
- Validity: The HRWL is typically valid for 5 years, after which it must be renewed.
- Renewal Process: Some Employers Seek a Verification of Competency, (VOC) this is a process of a short theory assessment and practical to verify you are competent in operation of a EWP
Regulatory Bodies by State/Territory
The HRWL is regulated by the work health and safety (WHS) authorities in each state or territory. The licensing process and fees may vary slightly depending on the jurisdiction:
- New South Wales (NSW): SafeWork NSW
- Victoria (VIC): WorkSafe Victoria
- Queensland (QLD): Workplace Health and Safety Queensland (WHSQ)
- South Australia (SA): SafeWork SA
- Western Australia (WA): WorkSafe WA
- Australian Capital Territory (ACT): WorkSafe ACT
- Northern Territory (NT): WorkSafe NT
- Tasmania (TAS): WorkSafe Tasmania
Sevenclean
Good on ya for putting this together! Real quality stuff.